Input: 220-240V AC, 50Hz, 300mA
Output current: 0.8A
Charging voltage:
Lead acid: 7.3V/ 14.4V DC
LiFePO4; 12 .8V/4 cells
0.8A 6V/ 12V 7 Steps Intelligent Battery Charger
With CC/CV Control for LiFePO4 & Lead Acid Battery of Wet, MF, VRLA, AGM & GEL
Input: 220-240V AC, 50Hz, 300mA
Output current: 0.8A
Charging voltage:
Lead acid: 7.3V/ 14.4V DC
LiFePO4; 12 .8V/4 cells
Charging current:
6V lead acid: 0.8A
12V lead acid: 0.8A
LiFePO4: 0.8A
Insulation: IP 65 (water & dust)
Dimension: 107 x 63 x 34mm
Protection:
√ Short circuit protection
√ Overload protection
√ Wrong polarity protection
√ Reverse battery protection
√ Safety timer protection
Principle programme representation 6V/ 12V Pb
Principle programme representation LiFePO4
LED indication:
| LED | INDICATION | LED COLOR |
| Power On Reset | Al LED flash 2 times for self check. | Red Flashing |
| Stand-by | ON: no battery at Standby. OFF: Battey Charging. | Green |
| Error(dual color) | Flashing: 1.Timer for lead acid (red ) 2. Timer for Lithium (yellow flash) 3. Total timer (yellow flash) 4. Battery voltage (yellow) 5. Reversed polarity (red flash) | Red & yellow flashing |
| 25% | Flashing Steady OFF: full charged | Rea flashing |
| 50% | Flashing Steady OFF: full charged | Orange flashing |
| 75% | Flashing Steady OFF: full charged | Yellow flashing |
| 100% | Flashing Steady: full charged | Green flashing |
| 6V | Mode selected | Red |
| 12V | Mode selected | Red |
| Lithium | Mode selected | Red |
